How long should HG mould spray be left to work?

To effectively remove mould and black deposits, it is important to allow sufficient time for the product to work. We recommend leaving HG mould spray or HG mould remover foam spray to act for at least 30 minutes. Spray the surface from a distance of 3 to 5 cm to allow the product to penetrate properly. For heavily soiled areas, the treatment may need to be repeated after 30 minutes. Always use a cleaner specifically developed for mould and follow the instructions on the packaging carefully for a safe and effective result.

HG solutions for removing mould

To effectively remove mould and black spots, HG offers several solutions specifically developed and approved for this purpose:

• HG mould remover foam spray: This mould cleaner features a unique foam formula that clings to the surface for longer, allowing for better and more prolonged action. The foam has a less pungent smell, is easier to direct and reduces splashing. It is suitable for tiled and plaster walls and grout in bathrooms, showers, toilets, kitchens and basements.
• HG mould spray: This mould, moisture and weathering stain remover destroys mould in damp areas without scrubbing or scouring. It is suitable for tiled walls, silicone joints and plasterwork, both indoors and outdoors, and bleaches grey and black mouldy spots.

We recommend spraying the surface from a distance of 3 to 5 cm. For stubborn soiling, repeat the treatment after 30 minutes and leave the product to work for a further 30 minutes. Then clean the treated surface thoroughly with water and a sponge. You can find more practical tips in our guides on how to get rid of mould, mould removal guide, how to get rid of mould on walls and bathroom cleaning tips.

Solutions for mould problems in the home

When dealing with mould problems in the home, people often look for general solutions. It is important to note that mould can be persistent and not every method delivers the same results. In practice, non-specific approaches are often less effective and may pose risks to the treated surface.

• Ensure the affected surface is easily accessible before starting.
• Always allow sufficient time for the cleaning product to work effectively.
• After treatment, clean the surface thoroughly with water and a sponge.

For reliable results, we recommend using a mould cleaner specifically developed and approved for this purpose. Always check the manufacturer's maintenance instructions for the surface you're about to clean beforehand to prevent damage and ensure you're using the right product. This approach ensures both safety and effectiveness when dealing with mould problems in your home.

Causes of mould growth and how to prevent it with HG mould spray

Mould growth often occurs in conditions where moisture is present for prolonged periods. With HG mould spray, you can effectively remove existing mould, but it's also important to tackle the root cause of the problem. Common causes include:

• Damp rooms with inadequate ventilation, such as bathrooms, showers and basements
• Leaks or persistent moisture problems in walls, ceilings or floors
• Sustained high indoor humidity levels
• Condensation forming on cold surfaces due to poor insulation

To help prevent mould growth, we recommend ensuring rooms are well ventilated, addressing moisture problems promptly and keeping humidity levels under control. Use HG mould spray according to the instructions to remove existing mould and always check the surface manufacturer's maintenance instructions beforehand before applying the product.